Oberdorfer 300BS-10F13 Centrifugal Pump and motor unit
Oberdorfer # 300BS-10F13
Oberdorfer catalog # 300BS-10F13, Bronze Self-Priming Centrifugal Pump and motor unit, Bronze construction, Bronze impeller, FKM Viton/Ceramic Mechanical Seal. Inlet Port is 1 Inch NPT Inlet, Discharge Port is 1 Inch NPT Outlet. This unit is close coupled to a 1/3 HP, Single Phase, 56J Frame, 3450/2850 RPM, ODP Motor.
Price : $ 2627.60
Product Information :
Parts Page (click here)The Oberdorfer 300BS-10F13 is a Bronze Self-Priming Centrifugal Pump and motor unit, with Bronze Impeller, FKM Viton/Ceramic Mechanical Seal, 1 Inch NPT Inlet by 1 Inch NPT Outlet Ports, and is close coupled to a 1/3 HP, Single Phase, 56J Frame, 3450/2850 RPM, ODP Motor. This pump is a self priming pump with a suction lift of 15 feet without a foot or check valve (25 foot suction lift using a foot or check valve and a filled inlet line). It has a 1/2 inch pipe plug on the tank the top that is for the initial filling of the priming chamber and inlet line, and then the pump priming is automatic thereafter. This pump model is widely used for the pumping of Perchloroethylene, and is also ideal for marine service - air conditioning, bilge service, and sea water recirculating. It must be mounted in the horizontal position. The pump uses a mechanical type shaft seal with a FKM Viton rubber element. It is suitable for oils, fuels, lubricants, most mineral acids, and many solvents that attack other rubbers such as Carbon Tetrachloride, toluene, benzene, and xylene. This long-life centrifugal pump delivers high flows up to 22 GPM with a maximum pressure of 14 PSI. This pump operates by liquid entering at the center and being thrown outward radially by centrifugal force. The impeller is not in contact with other pump parts resulting in quiet, efficient pumping action. Consequently, a relief valve is not required.
Parts and Accessories for Oberdorfer model 300BS-10F13
Major Overhaul Kit / Rebuild Kit :
Catalog # 11290, Repair Kit, includes Impeller, Seal Assembly, Diffuser Gasket, O-Ring
Price: $ 385.00
Impeller :
Catalog # 7193, Impeller
Price: $ 232.00
Shaft Seal :
Catalog # 32210, Seal Assy FKM
Price: $ 222.00
Motor :
Catalog # 5859, Electric Motor, motor only, 1/3 Horsepower, 1PH, 115 Volts, 3450 RPM, ODP Enclosure, 56J NEMA Frame
Price: $ 686.00
Applications
Features: • Self-Priming to 20 Feet Suction Lift • Rugged Bronze Construction • Ideal for marine service (air conditioning, bilge, and sea water recirculating). • O-Ring Housing seal eliminates gasket problems • Auxiliary Connections - for convenient priming and draining • Multiple Mechanical Shaft Seal Options -for various applications • Pump Heads mount to Standard Footed Nema 56J Jet Pump Motors • For Pedestal Style, see 30PB • Optional Lifting Handle Applications: Up to 22 gallons per minute water flow and suction lift of 15 feet without a foot or check valve (25 foot suction lift using a foot or check valve and a filled inlet line). A 1/2 pipe plug on the tank top is for initial filling of priming chamber and inlet line-- pump priming is automatic thereafter. Pump seal is mechanical carbon face type mated to ceramic wear face for maximum durability. Other seal components are made of Buna N with low swell characteristics for compatibility with a wide range of liquids including many chemicals and solvents. These pump models are widely used for the pumping of Perchloroethylene. Must be operated in the horizontal position. (As shown in picture)