Tuthill # 4C2FV-C-RH-A-7-88501 Rotary Gear Pump and Motor unit

Tuthill Pump 4C2FV-C-RH-A-7-88501

Tuthill # 4C2FV-C-RH-A-7-88501

Tuthill catalog # 4C2FV-C-RH-A-7-88501, Cast Iron Rotary Gear Pump and Motor unit, close coupled pump and motor assembly, with a Viton Lip Seal, Internal Relief Valve, Relief valve is set at 90 PSI (can be adjusted in field), Clockwise rotation only (from shaft end view), RH right-hand suction port (from shaft end view), A-type Tang Shaft, Viton elastomers, and 1-1/2 Inch NPT by 1-1/2 Inch NPT ports. This pump is close coupled and assembled onto a 3/4 Horsepower, 1725 RPM, 208-230/460 Volts, Three Phase, TEFC (Totally Enclosed Fan Cooled), 56CZ FRAME electric motor.

Price : $ 3897.12

Qty :

Same Day (2 in stock)

 

Product Information :

The Tuthill 4C2FV-C-RH-A-7-88501 is a Cast Iron Rotary Gear Pump and Motor unit, close coupled pump and motor assembly, with a Viton Lip Seal, Internal Relief Valve, Relief valve is set at 90 PSI (can be adjusted in field), Clockwise rotation only (from shaft end view), RH right-hand suction port (from shaft end view), A-type Tang Shaft, Viton elastomers, and 1-1/2 Inch NPT by 1-1/2 Inch NPT ports. This pump is close coupled and assembled onto a 3/4 Horsepower, 1725 RPM, 208-230/460 Volts, Three Phase, TEFC (Totally Enclosed Fan Cooled), 56CZ FRAME electric motor. The motor on this pump and motor assembly is a proprietary Tuthill motor with an internal coupling hub making for an extremely compact rotary gear pump and motor. This pump and motor assembly includes the 3CF26 Adapter. This pump was specifically developed for flange mounting applications and for close coupling to Tuthill's special motors to provide extremely compact close-coupled combinations. This pump is supplied with a single spring-loaded lip seal, and can handle inlet pressures to 25 PSI, and has a maximum differential capability of 100 PSI. Tuthill CF Series cast iron pumps employ the internal gear pumping principle. There are only two moving parts, and the pumping action is based on a rotor, idler gear, and crescent shaped partition cast integral with the cover. This pump has an RH right-hand suction port designation from the shaft end view. This pump has an internal relief valve, and the adjusting screw of the relief valve is located on the suction side of the pump. The internal relief valve on this pump is designed for over-pressure protection only. It is not intended as a flow control device or for any similar use. Continuous operation of the relief valve will result in excessive heat buildup within the pump cavity that could cause serious internal damage. Make certain the adjusting screw of the relief valve is located on the suction side of the pump. Unless otherwise specified at the time of order, this pump is supplied with the standard spring, with a range of 30-225 psi, set to provide full bypass relief at 90 psi. This pump should not be used for handling plain water, corrosive or abrasive liquids or liquids not possessing adequate lubricity. Do not run the pump dry, as this could cause severe damage to the internal seal, bushings and/or metal parts.

Features :


Parts and Accessories for Tuthill model 4C2FV-C-RH-A-7-88501


Pump less Motor / Replacement Pumphead :

Catalog # 4C2FV-C-RH-A-7, Cast Iron Rotary Gear Pump, Pump End Only, no motor, Flange Mount, with a Viton Lip Seal, Internal Relief Valve, Relief valve is set at 90 PSI (can be adjusted in field), Clockwise rotation only (from shaft end view), RH right-hand suction port (from shaft end view), A-type Tang Shaft, Viton elastomers, and 1-1/2 Inch NPT by 1-1/2 Inch NPT ports.

Price: $ 1733.49

Qty :

Can Ship : Same Day (4 in stock)


Motor :

Catalog # 88501, Motor with internal mod-A tang hub, 3/4 Horsepower, 1725 RPM, 208-230/460 Volts, Three Phase, TEFC (Totally Enclosed Fan Cooled), 56CZ FRAME, electric motor only. This motor requires a pump mounting bracket to mount the pump to the motor, if not already supplied.

Price: $ 1599.40

Qty :

Can Ship : Same Day (4 in stock)


Shaft Seal :

Catalog # 3CF94-7, Viton lip seal

Price: $ 188.80

Qty :

Can Ship : Same Day (5 in stock)


Other Parts :

Catalog # 1L519, 3 Piece Coupling

Price: $ 40.25

Qty :

Can Ship : Same Day (2 in stock)

Applications

There are many applications that the Tuthill 4C2FVCRHA788501 can be used in. Original Equipment Manufacturers worldwide incorporate these internal gear pumps into their products for lubrication and transfer service. It can be used in Air Conditioning Compressors, Gearboxes, Air Compressors, Gas Compressors, Engines, and Transmissions. This reliable internal gear pump is ideal for custom OEM lubricating, lowpressure hydraulic, transfer, circulating, burner oil and many other industrial pump applications. This pump and motor unit must be properly aligned during installation and periodically checked, since misalignment may occur later due to abuse or other conditions. Pipe strain can force the pump and motor shafts out of alignment. Therefore, all piping to the pump must be properly supported. Do not allow the pump to act as a pipe support.