Tuthill # 3C2F-CC-LH-A-89259 Rotary Gear Pump and Motor unit

Tuthill Pump 3C2F-CC-LH-A-89259

Tuthill # 3C2F-CC-LH-A-89259

Tuthill catalog # 3C2F-CC-LH-A-89259, Cast Iron Rotary Gear Pump and Motor unit, close coupled pump and motor assembly, with Counter Clockwise rotation only (from shaft end view), LH left-hand suction port (from shaft end view), A-type Tang Shaft, and 1-1/4 Inch NPT by 1-1/4 Inch NPT ports. This pump is close coupled and assembled onto a 3 Horsepower, 1125 RPM, 208-230/460 Volts, Three Phase, TEFC (Totally Enclosed Fan Cooled), 215CZ FRAME electric motor.

Price : $ 2928.76

Qty :

Same Day (2 in stock)

 

Product Information :

The Tuthill 3C2F-CC-LH-A-89259 is a Cast Iron Rotary Gear Pump and Motor unit, close coupled pump and motor assembly, with Counter Clockwise rotation only (from shaft end view), LH left-hand suction port (from shaft end view), A-type Tang Shaft, and 1-1/4 Inch NPT by 1-1/4 Inch NPT ports. This pump is close coupled and assembled onto a 3 Horsepower, 1125 RPM, 208-230/460 Volts, Three Phase, TEFC (Totally Enclosed Fan Cooled), 215CZ FRAME electric motor. The motor on this pump and motor assembly is a proprietary Tuthill motor with an internal coupling hub making for an extremely compact rotary gear pump and motor. This pump and motor assembly includes the 3CF26 Adapter. This pump was specifically developed for flange mounting applications and for close coupling to Tuthill's special motors to provide extremely compact close-coupled combinations. This pump is supplied with a single spring-loaded lip seal, and can handle inlet pressures to 25 PSI, and has a maximum differential capability of 100 PSI. This pump has only two moving parts. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. The space between the outside diameter of the idler and the inside diameter of the rotor is sealed by the crescent. Power applied to the rotor is transmitted to the idler gear with which it meshes. The liquid fills the spaces between the teeth of the idler and the rotor and is carried past the crescent partition through the pressure side of the pump. When the teeth mesh on the pressure side, the liquid is forced from the spaces and out through the discharge port. This pump has an LH left-hand suction port designation from the shaft end view. This pump can be driven in either direction of rotation, unless outfitted with an internal relief valve. This pump does NOT have an internal relief valve, so an external relief valve should be added somewhere on the discharge piping. Please note that this pump is a positive displacement pump and as the pump rotates, liquid is positively delivered to the discharge side of the pump. If the discharge line is closed off, pressure will increase until the drive stalls and/or fails, the pump breaks or ruptures, or the piping bursts. To prevent this from happening, the use of a pressure relief valve is required, or use of an in-line safety relief valve, pressure shutdown switch or other similar device. A relief valve that directs the flow back to the supply tank is recommended. This pump should not be used for handling plain water, corrosive or abrasive liquids or liquids not possessing adequate lubricity. Do not run the pump dry, as this could cause severe damage to the internal seal, bushings and/or metal parts.

Features :


Parts and Accessories for Tuthill model 3C2F-CC-LH-A-89259


Pump less Motor / Replacement Pumphead :

Catalog # 3C2F-CC-LH-A, Cast Iron Rotary Gear Pump, Pump End Only, no motor, Flange Mount, with Counter Clockwise rotation only (from shaft end view), LH left-hand suction port (from shaft end view), A-type Tang Shaft, and 1-1/4 Inch NPT by 1-1/4 Inch NPT ports.

Price: $ 1074.42

Qty :

Can Ship : Same Day (4 in stock)


Motor :

Catalog # 89259, Motor with internal mod-A tang hub, 3 Horsepower, 1125 RPM, 208-230/460 Volts, Three Phase, TEFC (Totally Enclosed Fan Cooled), 215CZ FRAME, electric motor only. This motor requires a pump mounting bracket to mount the pump to the motor, if not already supplied.

Price: $ 7164.98

Qty :

Can Ship : Same Day (4 in stock)


Shaft Seal :

Catalog # 3CF94-7, Viton lip seal

Price: $ 188.80

Qty :

Can Ship : Same Day (5 in stock)


Other Parts :

Catalog # 1L519, 3 Piece Coupling

Price: $ 40.25

Qty :

Can Ship : Same Day (2 in stock)

Applications

There are many applications that the Tuthill 3C2FCCLHA89259 can be used in. Original Equipment Manufacturers worldwide incorporate Tuthill internal gear pumps into their products for lubrication and transfer service. This widespread acceptance is a result of product performance and reliability. This reliable internal gear pump is ideal for lubricating, lowpressure hydraulic, transfer, circulating, burner oil and many other industrial pump applications. It can be used in Air Conditioning Compressors, Gas Compressors, Gearboxes, Transmissions, Air Compressors, and Engines. This pump and motor unit must be properly aligned during installation and periodically checked, since misalignment may occur later due to abuse or other conditions. Pipe strain can force the pump and motor shafts out of alignment. Therefore, all piping to the pump must be properly supported. Do not allow the pump to act as a pipe support.