Tuthill # 3C2BV-CC Rotary Gear Pump

Tuthill Pump 3C2BV-CC

Tuthill # 3C2BV-CC

Tuthill catalog # 3C2BV-CC, Cast Iron Rotary Gear Pump, Pump End Only, no motor, Flange Mount, with Internal Relief Valve, Relief valve is set at 90 PSI (can be adjusted in field), Counter Clockwise rotation only (from shaft end view), standard shaft, and 1-1/4 Inch NPT by 1-1/4 Inch NPT ports.

Price : $ 1983.43

Qty :

Same Day (4 in stock)

 

Product Information :

The Tuthill 3C2BV-CC is a Cast Iron Rotary Gear Pump, Pump End Only, no motor, Flange Mount, with Internal Relief Valve, Relief valve is set at 90 PSI (can be adjusted in field), Counter Clockwise rotation only (from shaft end view), standard shaft, and 1-1/4 Inch NPT by 1-1/4 Inch NPT ports. This pump was designed for flange or foot mounting applications. It may also be adapter mounted to NEMA C face electric motor using the correct sized motor to pump mounting adapter. This pump is supplied with a mechanical seal capable of handling inlet pressures to 250 PSI at a standard 1725-RPM motor speed with a maximum discharge pressure of 300 PSI. The maximum differential for this pump is 150 PSI. Tuthill CF Series cast iron pumps employ the internal gear pumping principle. There are only two moving parts, and the pumping action is based on a rotor, idler gear, and crescent shaped partition cast integral with the cover. This pump has an internal relief valve, and the adjusting screw of the relief valve is located on the suction side of the pump. The internal relief valve on this pump is designed for over-pressure protection only. It is not intended as a flow control device or for any similar use. Continuous operation of the relief valve will result in excessive heat buildup within the pump cavity that could cause serious internal damage. Make certain the adjusting screw of the relief valve is located on the suction side of the pump. Unless otherwise specified at the time of order, this pump is supplied with the standard spring, with a range of 30-225 psi, set to provide full bypass relief at 90 psi. This pump should not be used for handling plain water, corrosive or abrasive liquids or liquids not possessing adequate lubricity. Do not run the pump dry, as this could cause severe damage to the internal seal, bushings and/or metal parts.

Features :


Parts and Accessories for Tuthill model 3C2BV-CC


Shaft Seal :

Catalog # 3C1B9-7, Viton mechanical seal

Price: $ 361.60

Qty :

Can Ship : Same Day (5 in stock)


Other Parts :

Catalog # 3C81, Mounting Foot for 3C2B/4C2B

Price: $ 200.00

Qty :

Can Ship : Same Day (2 in stock)

Applications

There are many applications that the Tuthill 3C2BVCC can be used in. Original Equipment Manufacturers worldwide incorporate Tuthill internal gear pumps into their products for lubrication and transfer service. This widespread acceptance is a result of product performance and reliability. This reliable internal gear pump is ideal for lubricating, lowpressure hydraulic, transfer, circulating, burner oil and many other industrial pump applications. It can be used in Air Conditioning Compressors, Gas Compressors, Gearboxes, Transmissions, Air Compressors, and Engines.