Tuthill 2C2ENV-CC-7 Pump - Ball Bearing Relief valve CCW rotation

Tuthill # 2C2ENV-CC-7

Tuthill catalog # 2C2ENV-CC-7, Cast Iron Rotary Gear Pump. Pump End Only. 8 GPM C Series. Cast Iron Construction NO motor. Ball Bearing on Shaft. Has Internal Relief Valve. Relief valve is set at 90 PSI (can be adjusted in field). COUNTER Clockwise rotation only (from shaft end view). Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT.

Price : $ 1385.60

Product Information :

Model C2EN pumps are sleeve and ball bearing units with a lip seal and mounting foot designed for indirect (belt, chain, gear) drive. This size has a capacity of 8 GPM with differential pressures to 100 psi. The maximum discharge pressure capability is 100 psi. The internal relief valve on this C Series pump is designed for over-pressure protection only. It is not intended as a flow control device or for any similar use. Continuous operation of the relief valve will result in excessive heat buildup within the pump cavity that could cause serious internal damage. Make certain the adjusting screw of the relief valve is located on the suction side of the pump. Unless otherwise specified at the time of order, all C Series pumps with an internal relief valve (except CC models) are supplied with the standard spring, with a range of 10 - 200 psi, set to provide full bypass relief at 90 psi.

Features :

Pump Body:

Cast Iron

Relief Valve:

Relief valve is factory set to 90 PSI for adjustment between 10-200 PSI. Other PSI ranges available.

Shaft Seal:

Sleeve Bushing Lip Seal Viton

Port Size:

Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT.

Tuthill # 2C2ENV-CC-7 Pump with Ball Bearing Relief valve CCW rotation