Oberdorfer model # 994 - Gear Pump

Oberdorfer Pump 994

Oberdorfer # 994

Oberdorfer catalog # 994, Gear Pump End Only (no motor - for close coupled pump and motor assembly ) 10 GPM, Buna Lip Shaft Seal, Pump End Only. 1/2" inch NPT Ports. *** NOTE : This catalog number has been updated by the manufacturer, and will ship as the Oberdorfer Pumps catalog # N994.

Price : $ 495.67

Qty :

Same Day (13 in stock)

 

Product Information :

Features :

Impeller:
Lip Seal Buna-N
Port Size:
1/2" inch NPT

Applications

Features • Bronze Construction with Stainless Steel Shafts • Helical gears for quiet operation • Easy Field Assembly to Motors • SelfLubricating Carbon Bearings • Oring seal for maximum leak protection Applications These pumps are suitable for all liquids that are compatible with bronze. Most common liquids are water, oil, and mild chemicals in the pHrange of 4 to 11. Viscous liquids require reduced shaft speeds of 1150 RPM or lower. Consult factory. Liquids containing solids, abrasives, powders or paint pigments are definitely not recommended for gear pumps. If abrasives are unavoidable, use a very low shaft speed. The recommended liquid temperature range is 32 F to 140 F for longest pump life. If more extreme temperature conditions exist, our factory should be consulted. Freezing of waterfilled pumps can cause damage and must be avoided. Oils at low temperatures are very viscous requiring a lower speed or extra power. SUCTION LIFT As a general rule, the suction lift should be kept at an absolute minimum by placing the pump as close to the liquid source as possible. A gear pump in new condition can lift 20 feet of water in the suction line. A foot valve preferably with builtin strainer is recommended at the beginning of the suction line. For a first startup, the pump should be primed to avoid dry running. Minimum size of the suction pipe is the size of the pump inlet port. For longer suction lines over 3 feet, or for viscous liquids, the pipe size should be at least one size or two sizes larger than the pump inlet port.