Jabsco # 8713-0005 Impeller

Jabsco Pump Parts 8713-0005

Jabsco # 8713-0005

Jabsco catalog # 8713-0005, Flexible Flexible Impeller, made of . Impeller has blades/fins, and is inches wide () x inches thick (), and has a inch () shaft hub.

Price : $ 453.75

Qty :

2 Weeks (0 in stock)

 

Product Information :

The Jabsco impeller # 8713-0005 is a flexible rubber impeller, made of , with blades/fins, and is inches wide () by inches thick (), and has a inch () shaft hub.


Applications:


Impeller Replacement:

Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don't use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.
The Flexible Impeller Removal Tool is the easiest way to remove impellers, especially when the pump is mounted in tight and cramped conditions. The Flexible Impeller Removal Tool easily removes the impeller, and removes the risk of expensive damage to the pump.
Click here for the Jabsco # 50070-0200 impeller puller sized for this impeller >>
The Jabsco # 50070-0200 Flexible Impeller Removal Tool is suitable for impellers from 2-1/2 inches (65mm) to 4-5/8 inches (118mm) in diameter. The Jabsco 8713-0005 impeller is inches () in diameter.
Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.
|