Jabsco part # 14281-003

The Jabsco 14281-003 is an impeller, Nitrile for a Jabsco rubber impeller pump. IMPELLER REPLACEMENT 1. Remove wing nuts, washers and end cover. 2. Remove pump head from seal housing. Remove O-rings from body grooves. 3. Push impeller from body bore. 4. Install new impeller in lubricated body bore by grasping hub and with a rotary motion push it into the body bore. Replace O-rings in body grooves. 5. Position the body over the through bolts against the seal housing. 6. Install end cover and secure with washers and wing nuts.