Burks catalog # A3CR6M-MV, Close Coupled Turbine Pump and Motor, regenerative turbine, All Bronze, with Bronze frame, Bronze impeller with Monel blades, Bronze raceway, 316 Stainless Steel shaft, Viton mechanical seal and O-ring, 1/2 inch NPT suction x 1/2 inch NPT discharge, close coupled to a 1/3 Horsepower, 3450 RPM, 60 Hz, 115 Volt, 1 Phase, capacitor start, open ventilated (not drip proof) Motor. Built from the stocked A3CR6M with the Viton seal fitted.
Price : $ 2225.70
The Burks A3CR6M-MV is a Close Coupled Turbine Pump and Motor, a regenerative turbine pump, All Bronze, with a Bronze frame, Bronze Impeller with Monel blades, Bronze raceway, 316 Stainless Steel shaft, Viton Mechanical Seal and Viton O-ring, 1/2 Inch NPT Suction x 1/2 Inch NPT Discharge, close coupled to a 1/3 Horsepower, 3450 RPM, 60 Hz, 115 Volt, 1 Phase, capacitor start, open ventilated (not drip proof) Motor. The Burks CR Series pumps are compact close coupled regenerative turbine pumps for clean, non-abrasive, lower viscosity liquids on low flow, high pressure duty, 1/3 HP, 3450 RPM, all bronze construction with a Monel bladed bronze impeller and 316 Stainless Steel shaft, for OEM and small system use. Life-Lok external impeller adjustment, exclusive to Burks, readjusts the impeller without disturbing the piping, disassembling the pump or replacing parts, for up to 40 percent longer service life. Carbon/ceramic mechanical shaft seal for temperatures to 225 degrees F; no coupling, so no alignment problems. Ball bearing motors with open ventilated enclosure, continuous duty, capacitor start with built-in overload protection. Every pump is factory tested. This pump is all bronze construction, with the Carbon/Ceramic/Viton mechanical seal and Viton O-ring, close coupled to a 1/3 Horsepower, 3450 RPM, 60 Hz, 115 Volt, 1 Phase, capacitor start, open ventilated (not drip proof) Motor. Suction and discharge connections are 1/2 Inch NPT Suction x 1/2 Inch NPT Discharge.
Major Overhaul Kit / Rebuild Kit :
Catalog # 22850-6-MV, Repair kit, Crane, Viton, for the CR6M: impeller, raceway, mechanical seal, O-ring gasket, impeller lock nut and instructions, Major Repair Kit
Price: $ 993.30
Minor Service Kit :
Catalog # SKCR-21914-21913, Seal kit, Viton, CR Series: Carbon/Ceramic/Viton mechanical seal 21914 and Viton O-ring gasket 21913
Price: $ 325.60
Shaft Seal :
Catalog # 21914, Mechanical seal, 1/2 inch, Carbon/Ceramic/Viton
Price: $ 279.40
Gasket/O-ring :
Catalog # 21913, Seal ring, Viton
Price: $ 46.20
The Burks CR Series close coupled regenerative turbine pumps are built for clear water and other clean, non-abrasive, lower viscosity liquids on low flow, high pressure applications - carpet cleaning machines, small steam generators, solar heating, booster and coolant service, spray nozzles, injector and venturi operation, low flow circulating and liquid transfer. Burks is the only regenerative turbine with the Life-Lok external impeller adjustment, which restores the impeller to raceway clearance, and the pump's pressure, without disturbing the piping or taking the pump apart.
The A3CR6M is the 1/3 HP, 3450 RPM, single phase model, rated 4.3 GPM at 20 feet of total head, with heads to 175 feet (76 PSI) on the performance curve. All bronze construction - bronze frame, bronze impeller with Monel blades, bronze raceway.
Maximum liquid temperature 225 degrees F with the standard Buna-N seal, inlet pressure 50 PSI, casing working pressure 150 PSI, viscosity 200 SSU. A strainer of about 20 mesh should be fitted on the suction side to keep chips and scale out of the raceway and impeller. Every pump is factory tested.
This model carries the Viton mechanical seal and Viton O-ring gasket in place of the standard Buna-N ones.