Burks catalog # 7WT5XMV, Self Priming Pump and Motor, Bronze Fitted, with Cast Iron casing, diffuser and motor adapter, built-in stainless steel basket strainer, Bronze semi open impeller, stainless steel shaft, Viton mechanical seal and suction sleeve, 2 inch NPT suction x 2 inch NPT discharge, and is close coupled to a 3/4 Horsepower, 3500 RPM, 60 HZ, 115/230 Volt, 1 Phase, capacitor start, ODP (Open Drip Proof) Motor.
Price : $ 3582.90
The Burks 7WT5XMV is a Self Priming Pump and Motor, Bronze Fitted, with a Cast Iron casing with built-in Stainless Steel basket strainer, a Bronze semi open Impeller, Stainless Steel shaft, Viton Mechanical Seal and suction sleeve, 2 Inch NPT Suction x 2 Inch NPT Discharge, and is close coupled to a 3/4 Horsepower, 3500 RPM, 60 HZ, 115/230 Volt, 1 Phase, capacitor start, ODP (Open Drip Proof) Motor. The Burks WT5X Series pumps are close coupled self priming centrifugal pumps, 3500 RPM, 60 HZ, 1/2 to 2 HP, for water and other 1.0 specific gravity liquids. Rugged bronze fitted cast iron construction with a non clogging bronze semi open impeller, stainless steel shaft and leakproof mechanical shaft seal; back pull-out design for easy servicing. Built-in stainless steel basket type strainer under a cover held by two knobs, so the basket can be cleaned without tools. Self priming once the case is filled with fluid, maximum suction lift 20 feet; diaphragms, flappers or check valves are not required in the suction piping, but are recommended. Swimming pool type motors with oversize ball bearings, open drip proof, continuous duty at all ratings; single phase motors have built-in overload protection, three phase motors must be installed with a magnetic starter. Maximum liquid temperature 225 degrees F with the standard Buna seal; every pump is factory tested and meets Hydraulic Institute standards. This pump is bronze fitted, with the built-in basket strainer, close coupled to a 3/4 Horsepower, 3500 RPM, 60 HZ, 115/230 Volt, 1 Phase, capacitor start, ODP (Open Drip Proof) Motor, with the Carbon/Ceramic/Viton mechanical seal and Viton suction sleeve. Suction and discharge connections are 2 Inch NPT Suction x 2 Inch NPT Discharge.
Minor Service Kit :
Catalog # SKWT5X-9762-9695, Seal kit, Viton: Carbon/Ceramic/Viton mechanical seal 09762-C-P, Viton suction sleeve 09695, flat casing gasket 08507 and Viton strainer cover gasket 20460 - WT5X
Price: $ 629.20
Impeller :
Catalog # 20409-A-2, Impeller, Bronze, semi open, 3/4 HP, 7WT5, 37WT5, 7WT5X, 37WT5X
Price: $ 1543.30
Shaft Seal :
Catalog # 09762-C-P, Mechanical seal, 5/8 inch, Carbon/Ceramic/Viton
Price: $ 279.40
Casing frozen or cracked ? New Pump Casing :
Catalog # 20411, Casing with strainer, Cast Iron, 2 inch NPT
Price: $ 4129.40
Gasket/O-ring :
Catalog # 08507, Casing gasket, flat, the pump has either a flat gasket or an O-ring, when in doubt order the flat gasket
Price: $ 41.80
The Burks WT5X Series self priming centrifugal pumps are compact close coupled pumps for water and other 1.0 specific gravity liquids, bronze fitted with a non clogging bronze semi open impeller and a stainless steel shaft. The WT5X has a built-in stainless steel basket type strainer under a removable cover. They are self priming once the casing is filled with liquid, to a maximum suction lift of 20 feet; diaphragms, flappers or check valves are not required in the suction piping, but are recommended.
Performance at 3500 RPM is 72 GPM at 10 feet of total head, 70 GPM at 20 feet, with ratings to 70 feet of head.
Maximum liquid temperature is 225 degrees F with the standard Buna seal, maximum inlet pressure 15 PSI and casing working pressure 60 PSI. Every pump is factory tested and meets Hydraulic Institute standards.
This model carries the Viton mechanical seal, Viton suction sleeve, Viton strainer cover gasket and Viton casing O-ring.