Burks Pump 320WT5MV Self Priming Pump and motor

Burks Pump 320WT5MV

Burks # 320WT5MV

Burks catalog # 320WT5MV, Self Priming Pump and Motor, Bronze Fitted, with Cast Iron casing, diffuser and motor adapter, Bronze semi open impeller, stainless steel shaft, Viton mechanical seal and suction sleeve, 2 inch NPT suction x 2 inch NPT discharge, and is close coupled to a 2 Horsepower, 3500 RPM, 60 HZ, 230/460 Volt, 3 Phase, ODP (Open Drip Proof) Motor.

Price : $ 3707.10

Qty :

Can Ship : Next Day (1 unit available)

Click Here for PARTS

 

Product Information :

The Burks 320WT5MV is a Self Priming Pump and Motor, Bronze Fitted, with a Cast Iron casing, a Bronze semi open Impeller, Stainless Steel shaft, Viton Mechanical Seal and suction sleeve, 2 Inch NPT Suction x 2 Inch NPT Discharge, and is close coupled to a 2 Horsepower, 3500 RPM, 60 HZ, 230/460 Volt, 3 Phase, ODP (Open Drip Proof) Motor. The Burks WT5 Series pumps are close coupled self priming centrifugal pumps, 3500 RPM, 60 HZ, 1/2 to 2 HP, for water and other 1.0 specific gravity liquids. Rugged bronze fitted cast iron construction with a non clogging bronze semi open impeller, stainless steel shaft and leakproof mechanical shaft seal; back pull-out design for easy servicing. Available with (WT5X) or without (WT5) a built-in basket type strainer. Self priming once the case is filled with fluid, maximum suction lift 20 feet; diaphragms, flappers or check valves are not required in the suction piping, but are recommended. Swimming pool type motors with oversize ball bearings, open drip proof, continuous duty at all ratings; single phase motors have built-in overload protection, three phase motors must be installed with a magnetic starter. Maximum liquid temperature 225 degrees F with the standard Buna seal; every pump is factory tested and meets Hydraulic Institute standards. This pump is bronze fitted, close coupled to a 2 Horsepower, 3500 RPM, 60 HZ, 230/460 Volt, 3 Phase, ODP (Open Drip Proof) Motor, with the Carbon/Ceramic/Viton mechanical seal and Viton suction sleeve. Suction and discharge connections are 2 Inch NPT Suction x 2 Inch NPT Discharge.


Parts and Accessories for Burks model 320WT5MV


Minor Service Kit :

Catalog # SKWT5-9762-9695, Seal kit, Viton: Carbon/Ceramic/Viton mechanical seal 09762-C-P, Viton suction sleeve 09695, flat casing gasket 08507 - WT5

Price: $ 446.60

Qty :

Can Ship : Same Day (2 in stock)


Impeller :

Catalog # 20409-A, Impeller, Bronze, semi open, 2 HP, 20WT5, 320WT5, 20WT5X, 320WT5X

Price: $ 997.70

Qty :

Can Ship : Same Day (2 in stock)


Shaft Seal :

Catalog # 09762-C-P, Mechanical seal, 5/8 inch, Carbon/Ceramic/Viton

Price: $ 279.40

Qty :

Can Ship : Same Day (5 in stock)


Casing frozen or cracked ? New Pump Casing :

Catalog # 20295, Casing, Cast Iron, 2 inch NPT

Price: $ 436.70

Qty :

Can Ship : Same Day (2 in stock)


Gasket/O-ring :

Catalog # 08507, Casing gasket, flat, the pump has either a flat gasket or an O-ring, when in doubt order the flat gasket

Price: $ 41.80

Qty :

Can Ship : Same Day (2 in stock)

Applications

The Burks WT5 Series self priming centrifugal pumps are compact close coupled pumps for water and other 1.0 specific gravity liquids, bronze fitted with a non clogging bronze semi open impeller and a stainless steel shaft. The WT5 is the model without the built-in basket strainer; the WT5X has one. They are self priming once the casing is filled with liquid, to a maximum suction lift of 20 feet; diaphragms, flappers or check valves are not required in the suction piping, but are recommended.

Performance at 3500 RPM is 94 GPM at 10 feet of total head, 93 GPM at 20 feet, with ratings to 90 feet of head.

Maximum liquid temperature is 225 degrees F with the standard Buna seal, maximum inlet pressure 100 PSI and casing working pressure 165 PSI. Every pump is factory tested and meets Hydraulic Institute standards.

This model carries the Viton mechanical seal, Viton suction sleeve and Viton casing O-ring.