Tuthill catalog # 4C2EV-C-A-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Has Internal Relief Valve. Relief valve is set at 90 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view). Tang Shaft. Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Price : $ 1624.00
The internal relief valve on this C Series pump is designed for over-pressure protection only. It is not intended as a flow control device or for any similar use. Continuous operation of the relief valve will result in excessive heat buildup within the pump cavity that could cause serious internal damage. Make certain the adjusting screw of the relief valve is located on the suction side of the pump. Unless otherwise specified at the time of order, all C Series pumps with an internal relief valve (except CC models) are supplied with the standard spring, with a range of 30 - 225 PSI, set to provide full bypass relief at 90 psi.
Shaft Seal :
Catalog # 3CF94-7, Viton lip seal
Price: $ 177.00
Applications Lubrication, Fluid Transfer, Hydraulics, High Temp Applications