Little Giant # 502020 2E-NYS Small Submersible Industrial Parts Washer Solvent Pump

The Little Giant 502020 is a 2E-NYS Small Submersible Industrial Parts Washer Solvent Pump, rated for 300 GPH gallons per hour at 1 foot of head open flow, with a 1/4 inch MNPT outlet port, coupled to a 1/40 Horsepower, 115 Volt, single phase Motor that has a 6 foot cord. This is an Oil-filled cast aluminum submersible pump for use with stoddard solvent and deodorized kerosene submerged parts washer applications only. Sealed unit has double-lip Viton seal and nylon volute with 1/4" MNPT discharge. 6 foot power cord without plug has Master Builders" conduit fitting at pump housing for mounting. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F. Thermally protected. This pump uses a 1/40 HP motor and a 1/4 inch MNPT discharge. It can pump liquids with a temperature of up to 120 F. The pump's housing and cover are made from aluminum; its volute, screen and impeller, nylon; and its shaft seal, Viton. This pump uses an oil-filled aluminum housing, a nylon volute and impeller, counduit fitting for mounting, a triple-lip Viton shaft seal, a 6 foot plugless cord, and thermal protections. It is designed specifically and exclusively for use in submerged parts washers and with UL (PJQU) solvents. It can pump up to 300 GPH at 1 foot
WEIGHT : The Little Giant 502020 weighs 4.83 Lbs.