Little Giant # 2E-NYS Small Submersible Industrial Parts Washer Solvent Pump 1/40 Horsepower

Little Giant Pump 2E-NYS

Little Giant # 2E-NYS

Little Giant catalog # 2E-NYS, Catalog # 502020, Small Submersible Industrial Parts Washer Solvent Pump, rated for 300 GPH gallons per hour at 1 foot of head open flow. Motor is 1/40 Horsepower, 115 Volts, Single Phase. Motor has a 6 foot cord. Inlet Port is 1/4 inch MNPT Outlet port, Discharge Port is 1/4 inch MNPT Outlet port.

Price : $ 216.00

Qty :

5 Days (direct from Little Giant)

 

Product Information :

The Little Giant 2E-NYS is a catalog # 502020, Small Submersible Industrial Parts Washer Solvent Pump, rated for 300 GPH gallons per hour at 1 foot of head open flow, with a 1/4 inch MNPT outlet port, coupled to a 1/40 Horsepower, 115 Volt, single phase Motor that has a 6 foot cord. This is an Oil-filled cast aluminum submersible pump for use with stoddard solvent and deodorized kerosene submerged parts washer applications only. Sealed unit has double-lip Viton seal and nylon volute with 1/4" MNPT discharge. 6 foot power cord without plug has Master Builders" conduit fitting at pump housing for mounting. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F. Thermally protected. This pump uses a 1/40 HP motor and a 1/4 inch MNPT discharge. It can pump liquids with a temperature of up to 120 F. The pump's housing and cover are made from aluminum; its volute, screen and impeller, nylon; and its shaft seal, Viton. This pump uses an oil-filled aluminum housing, a nylon volute and impeller, counduit fitting for mounting, a triple-lip Viton shaft seal, a 6 foot plugless cord, and thermal protections. It is designed specifically and exclusively for use in submerged parts washers and with UL (PJQU) solvents. It can pump up to 300 GPH at 1 foot
WEIGHT : The Little Giant 2E-NYS weighs 4.83 Lbs.

Features :

Port Size:
Inlet Port is 1/4 inch MNPT Outlet port, Discharge Port is 1/4 inch MNPT Outlet port.
Motor Specs :
1/40 Horsepower, 115 Volts, Single Phase. that has a 6 foot cord.

Applications

There are many applications that the Little Giant 2ENYS are used in. Typical applications for this pump include Submersible for pumping unheated metal parts cleaning solvent which is UL classified as PJQU.

To install, seal the power cord inside of liquidtight, 1/2 inch NPT steel intermediate metal conduit. Use caution to ensure that cord will not be nicked or cut. Consult pump nameplate data for proper voltage and frequency. Please note, the black or brown and white or blue wires are live and the green or green/yellow wire is ground. Be sure that the pump is fully submerged in the cleaning solvent. The pump power supply cord must be connected to a properly grounded, groundingtype receptacle. WARNING Do not allow the pumps power cord to come in contact with solvent. The solvent may damage the cord insulation, causing the cord to become stiff or lower its insulating properties. The pump is supplied with a threeconductor power cord. The third conductor is to ground the pump to prevent possible electrical shock hazard