Model # 30801-0115 Industrial Diaphragm Pump - 4 GPM

Jabsco Pump 30801-0115

Jabsco # 30801-0115

Jabsco catalog # 30801-0115, Industrial Diaphragm Pump - 4 GPM, 115VAC, 60Hz, 1 phase, 1.8 Amp, Diaphragm made of Santoprene, Valves made of Viton *** NOTE : This catalog number has been updated by the manufacturer, and will ship as the Jabsco Pumps catalog # 31801-0115.

Price : $ 482.11

 

Product Information :

Features :

Pump Body:
Glass Filled Polypropylene
Shaft Seal:
Diaphragm made of Santoprene, Valves made of Viton. NOTE: Viton equipped models are not suitable for potable water applications.
Port Size:
1/2" (13 mm) Hose Barb, Viton O-ring, and 1/2" Male Quest, EPDM O-ring
Motor / Amp Draw:
AC Capacitor Start Induction Motor, Fan Cooled, Sealed Ball Bearing Thermally Protected, 115VAC, 60Hz, 1 phase, 1.8 Amp, CSA, UL listed

Applications

• Suction Lift SelfPriming to 10 ft 3m wet, and 5 ft. 1.5m dry • Duty Cycle Continuous at 25 psi 1.7 bar and 70F 21C ambient temperature • Temperature Liquid temperature range is 45F to 130F 7C to 54C • Viscosity 250 cP maximum

APPLICATIONS This pump provides excellent service where 115VAC 60hz singlephase power is required for operation. The AC capacitor start induction motor dramatically extends motor service life in applications where permanent magnet DC motors would require regular maintenance to replace worn motor brushes. This pump is the clear choice for bulk transfer and recirculation applications. Recommended for use with mild acids and bases compatible with the materials of construction. Typical applications include chemical feed, chemical transfer, coolant recirculation, condensate removal, tank agitation, thermal mixing, filling, flushing, and washdown applications. Pump will selfprime and can be mounted up to 9 feet above the liquid supply level. Pump can run dry without damage. Builtin pressure switch automatically turns pump off when discharge valve is closed. Snapin ports for easy installation and maintenance. Optional 40 mesh inlet strainer mounts directly to suction port, and is available with 1/2" or 3/4" hose barb connection. Not for use with gasoline or other flammable liquids. Not for use where flammable vapors are present. Pump must be properly grounded and protected from direct contact with water or other liquids.