Model # 11810-9003 Pump AC w/ Nitrile Impeller

Jabsco Pump 11810-9003

Jabsco # 11810-9003

Jabsco catalog # 11810-9003, Pump and Motor assembly, Nitrile Impeller, c/w 1/3 Horsepower, 115 Volt Single Phase, ODP (Open Drip Proof) Electric Motor. 1/2" NPT Internal or 3/4" GHT External Ports.

Price : $ 776.73

 

Product Information :

Features :

Pump Body:
Bronze Construction
Impeller:
Jabsco Neoprene Compound or Buna available
Shaft:
Stainless Steel Shaft Protected by Stainless Steel Impeller Sleeve
Shaft Seal:
Lip Type
Port Size:
Both 3/4" Garden Hose External Thread and 1/2" Internal Pipe Thread
Motor / Amp Draw:
1/3 HP/1800 RPM, Continuous Duty

Applications

NOTE Table above shows approximate performance for new pump with nitrile impeller pumping water. &149; SELFPRIMING Pump will produce a suction lift approaching 10 feet 3m when dry and a lift up to 22 feet 6.7m when primed. Be sure suction lines are airtight or pump will not selfprime. &149; RUNNING DRY Unit depends on liquid pumped for lubrication. Do not run dry for more than 30 seconds. Lack of liquid will damage the impeller. &149; PRESSURES For continuous operation, pressure should not exceed 20 psi 1.4 kg/sq cm. &149; TEMPERATURES Nitrile impeller recommended for liquid temperatures of 50 to 180F 10 to 82C.

USES MARINE Bait tank circulation, transfer oil, wash down, and utility dock pumps. INDUSTRIAL Circulate coolant on machine tools, industrial filling systems, utility shop pump, transfer gum arabic, transfer distilled water, recharge water softeners, ice water recirculation, hydrostatic pressure testing, vacuum pump, and aspirating pump. FOOD, BEVERAGE, & DAIRY Circulate cooling water, defrost refrigeration coils, fill drums, wash down equipment and floors, and utility pump. HOME Fill and empty tubs and pools, empty basements, cesspools, water systems, water lawns and gardens, remove water from low areas, and recharge water softeners. PLUMBING Empty clogged sumps, drains, sinks and tubs, and pump out water closets. FARM Fill tractor tires, fill water tanks, pump out silo pits, liquid manures, transfer oil, and flush and clean animal pens. CONTRACTORS Remove water from excavations, supply water to mortar boxes and cement mixing, and washdown equipment. NOTICE Do not pump solvents, thinners, highly concentrated or organic acids. Damage to pump may result. If corrosive fluids must be handled, pump life will be prolonged if pump is flushed with water after each use or after each work day.