Jabsco model # 11810-7001 - Flexible Impeller Pump

Jabsco Pump 11810-7001

Jabsco # 11810-7001

Jabsco catalog # 11810-7001, Pump and Motor assembly, Neoprene Impeller, c/w 1/3 Horsepower, 115 Volt Single Phase, ODP (Open Drip Proof) Electric Motor. 1/2" NPT Internal or 3/4" GHT External Ports.

Price : $ 776.73

 

Product Information :

Features :

Pump Body:
Bronze
Impeller:
Neoprene
Shaft:
Lip Seal
Port Size:
Lip Seal
Motor / Amp Draw:
1/3 Horsepower, 115 Volts, Single Phase, ODP (Open Drip Proof)

Applications

NOTE Table above shows approximate performance for new pump with nitrile impeller pumping water. • SELFPRIMING Pump will produce a suction lift approaching 10 feet 3m when dry and a lift up to 22 feet 6.7m when primed. Be sure suction lines are airtight or pump will not selfprime. • RUNNING DRY Unit depends on liquid pumped for lubrication. Do not run dry for more than 30 seconds. Lack of liquid will damage the impeller. • PRESSURES For continuous operation, pressure should not exceed 20 psi 1.4 kg/sq cm. • TEMPERATURES Nitrile impeller recommended for liquid temperatures of 50 to 180F 10 to 82C.

Features • Easy to service and maintain. • Will tolerate abrasive wear this may affect performance seek advice from your distributer. • Handles hard and soft solids without clogging. • Non pulsating flow. Applications Flow rate up to 9.6 USgpm, maximum head 40ft 17.3psi Selfpriming from dry up to 2.4m 7.8ft