Cat Pump model # 1XP150.101 Plunger Pump

The Cat Pump 1XP150.101 is a Plunger Pump and motor unit with Aluminum construction, 3/8 inch NPT(F) Inlet port x 3/8 inch NPT(F) Discharge port, and is rated for up to 1.45 GPM, and 1000 PSI at maximum shaft speed of 1725 RPM. This positive displacement, reciprocating plunger pump is constructed with a plated aluminum body, 304 stainless steel valve assemblies, solid ceramic plungers, specially blended FPM (Fluorocarbon) seals and O-rings. In this XP series pump, fluid enters the inlet port and flows through the drive-end, lubricating the connecting rods and plunger rods as it passes to the inlet valves. Both inlet and discharge valves are spring-loaded closed and hydraulically opened, similar to plunger pumps, however, they utilize a flow-through ceramic plunger design. The continuous forward flow characteristics in conjunction with the packing design of plunger pumps result in improved suction capabilities as well as extended seal life. IMPORTANT : All high-pressure systems require a primary pressure regulating device (e. g. regulator, unloader) and a secondary pressure relief device (e. g. pop-off valve, relief valve). Failure to install such relief devices could result in personal injury or damage to pump or property.