Home Page  |  Contact Us  |  Customer Service  |  order View Your Order US Dollars We Ship Worldwide from the USA
layout_spacer
layout_spacer Buy Sherwood Pumps and Parts online from our website
9pixel_spacer layout_spacer
layout_spacer 9pixel_spacer
pumpagents_logo
Store Search :  
Enter keywords, model #"s or part #"s
searchbar_curve See All Pump Brands >>
Browse by Pump Type >>
layout_spacer layout_spacer layout_spacer layout_spacer layout_spacer layout_spacer layout_spacer layout_spacer layout_spacer layout_spacer
Engine Cooling
Pumps
Gear
Pumps
Centrifugal
Pumps
Rubber Impeller
Pumps
Obsolete
Pumps
Impeller
Kits

Scroll down the page for prices & model #"s, or to order a specific model.
CHMNA3X 1 HP - Noryl Centrifugal Pump End Only

FEATURES
Pump Body: Noryl
Impeller: Noryl
Shaft: Shaft is protected by the seal design (Noryl encased)
Shaft Seal: Noryl encased Viton Mech Seal
Port Size: 1-1/2" x 1-1/2" FNPT
Motor / Amp Draw: Centrifugal Pump End Only (no motor), for mounting on a 3450 RPM, 1 HP, Nema 56J frame motor (with foot)
APPLICATIONS
Gallons per Minute at Discharge Height Above Pumping level
20" 30" 40" 50" 60" 70"
53
GPM
48
GPM
44
GPM
38
GPM
28
GPM
14
GPM


NOTE: Table shows approximate Head-Flow for new pump.

DESIGN: The pumps are made of Noryl, which is non-metallic, chemical-resistant to most acids, alkalis, and inorganic solvents. These pumps are equipped with a unique chemical-resistant carbon ceramic mechanical seal with Viton elastomer having the stainless steel components sealed in Noryl allowing for a complete non-metallic Noryl wet end. This unique seal guarantees reliability through simplicity and balance of design. Even the motor and pedestal drive shaft is protected by the seal design.
VISCOSITY and SPECIFIC GRAVITY: Standard pump models (at 3450 RPM) will handle viscosity to 100 SSU (at 1.1 specific gravity or less) and up to 200 SSU (specific gravity of 1.0 or less). For viscosity up to 400 SSU (specific gravity of 1.0 or less), increase motor HP by one size.
PRESSURES: Maximum Pump performance up to 79 Feet TDH. Maximum Booster Inlet Pressure is 30 PSI.
TEMPERATURES: Recommended for liquid temperatures up to 180°F

USES :
Shertech close-coupled non-metallic pumps produce high flow rates under moderate head conditions. Designed for continuous medium pressure circulation and transfer of non-flammable liquids, water circulation, booster service, irrigation, spraying systems, jockey pump service, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction lift is required. Water seal flush port is provided for the decontamination of chemicals on the seal and seat elastomers.

NOTICE :
Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not use in flammable and/or explosive atmospheres. When pumping hazardous or dangerous materials, use only in room or area designated for that purpose. For your protection, always wear proper clothing, eye protection, etc. in case of any malfunction. For proper handling techniques and cautions, contact your chemical supplier, insurance company and local agencies (fire dept., etc.). Failure to comply with this warning could result in personal injury and/or property damage.

Sherwood Pump CHMNA3X
CHMNA3X 1 HP - Noryl Centrifugal Pump End Only
Model # Description Price / ea. ORDER CAN SHIP


layout_spacer layout_spacer layout_spacer layout_spacer layout_spacer layout_spacer layout_spacer layout_spacer layout_spacer layout_spacer

Store Policy  |  Terms & Conditions  |  Contact Us  |  Site Map Copyright © 2016 Equipment Agents Inc.