Little Giant # 501020 1-YS Small Submersible Industrial Parts Washer Solvent Pump

The Little Giant 501020 is a 1-YS Small Submersible Industrial Parts Washer Solvent Pump, Oil-filled, Direct Drive, rated for 205 GPH gallons per hour at 1 foot of head open flow, with a 1/4 inch MNPT outlet port, coupled to a 1/150 Horsepower, 115 Volt, single phase Motor that has a 6 foot cord. This is an Oil-filled cast aluminum submersible pump for use with stoddard solvent and deodorized kerosene submerged parts washer applications only. Sealed unit has double-lip Viton seal and nylon volute with 1/4" MNPT discharge. 6' power cord without plug has Master Builders" conduit fitting at pump housing for mounting. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100F. Thermally protected. This pump uses a 1/150 HP motor, a screened intake, and a 1/4 inch MNPT discharge. Its huosing and cover are made from aluminum; its volute an impeller, nylon; its shaft seal, Viton; and its screen, polyethylene. This pump uses an oil-filled aluminum housing, a nylon volute and impeller, conduit fitting for mounting, a triple-lip Viton shaft seal, a 6 foot plugless cord, and thermal protections. It can be used to pump UL (PJQU) solvents. It can pump up to 205 GPH at 1 foot
WEIGHT : The Little Giant 501020 weighs 3.33 Lbs.