Little Giant # 1-MA Submersible Industrial Pump 1/200 HP

Little Giant Pump 1-MA

Little Giant # 1-MA

Little Giant catalog # 1-MA, Catalog # 521203, Small Submersible Industrial Pump, Oil-filled, Direct Drive, rated for 170 GPH gallons per hour at 1 foot of head open flow. Motor is 1/200 Horsepower, 115 Volts, Single Phase. Motor has a 6 foot cord. Inlet Port is 1/4 inch MNPT Outlet port, Discharge Port is 1/4 inch MNPT Outlet port.

Price : $ 141.75

Qty :

5 Days (direct from Little Giant)

 

Product Information :

The Little Giant 1-MA is a catalog # 521203, Small Submersible Industrial Pump, Oil-filled, Direct Drive, rated for 170 GPH gallons per hour at 1 foot of head open flow, with a 1/4 inch MNPT outlet port, coupled to a 1/200 Horsepower, 115 Volt, single phase Motor that has a 6 foot cord. This is a small submersible oil-filled pump with epoxy coated cast aluminum housing. For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This compact 170 GPH pump features a 1/4" MNPT discharge, 7' shut-off head capability, and screened inlet. The pump uses a 1/200 HP oil-filled motor and a 1/4 inch discharge flange. Its housing and cover are made from epoxy coated cast aluminum; its volute, impeller and screen, polypropylene; and its shaft seal, Nitrile. It can pump liquid with a maximum temperature of 120 F. This pump is designed specifically and exclusively for submersible applications. It uses an epoxy coated die-cast aluminum housing, an oil-filled motor, and a 1/4 inch MNPT discharge. It has a 7 foot maximum lift, and requires 70 watts of power. Models 521500 and 521286 also offer thermal overload protection
WEIGHT : The Little Giant 1-MA weighs 3.17 Lbs.

Features :

Port Size:
Inlet Port is 1/4 inch MNPT Outlet port, Discharge Port is 1/4 inch MNPT Outlet port.
Motor Specs :
1/200 Horsepower, 115 Volts, Single Phase. that has a 6 foot cord.

Applications

There are many applications that the Little Giant 1MA are used in. Typical applications for this pump include Water transfer or recirculation, and water displays.

This pump may be used submerged or inline. It may be positioned at any attitude, but preferably with the volute located down or to the side. The weight of the pump must be supported adequately. DO NOT support the pump by the discharge connection alone. The pump may be supported by using the two mounting holes in the back of the pump. These holes accept 8 selftapping screws. Hole depth is.37" DO NOT exceed the hole depth. Do not restrict the intake side of the pump. This may cause damage to the seal and may starve the pump. For reduced flow rates, place a valve on the discharge side of the pump, or if flexible vinyl tubing is used a clamp on the tubing to restrict the flow. Do not let the unit operate dry. It is cooled by pumping fluid. You may damage the seal and the motor may fail if the pump is allowed to run dry. If the unit is going to be idle for a period of time, follow the cleaning instructions outlined in the usr manual. Do not let the unit freeze, as this may cause cracking or distortion that may destroy the unit