Series # 18590 Self Priming Macerator Pump
Jabsco Pumps
• Product Data Sheet (Performance & Dimensions)
• Operation & Maintenence Manual (O & M)
• Parts List & Parts Prices for this Pump
• Order Parts
| FEATURES
|
| Pump
Body: |
Self-Priming Flexible Impeller with Stainless Steel Wearplate
|
|
Impeller: |
Jabsco Nitrile compound
|
|
Shaft: |
Stainless Steel Shaft
|
|
Shaft Seal: |
Lip Type
|
|
Ports: |
Inlet - 1-1/2" (38mm) Hose Barb and 1-1/2" N.P.T. (Male)
Outlet - 1" (19mm) Hose Barb
|
|
Motor: |
Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft Includes Run-Dry Protection Device that shuts-off pump after 20 seconds of run-dry. Complies with USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection.
|
|
Weight: |
5 lb (2.3 kg) Approx.
|
|
|
|
|
|
APPLICATIONS |
|
The JABSCO 18590 series dc macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. The JABSCO macerator is self-priming to a five foot lift when impeller is wet, four foot when dry, and may be mounted in any convenient point in the waste discharge system. The macerator section grinds waste down to a particle size of 1/8" (3mm) maximum so it can easily by pumped through a 1" (19mm) ID discharge hose.The pump section is self priming,permitting the unit to be mounted above the tank in a convenient location. (For optimal efficiency, locatepump as close to holding tank as possible.)The macerator has an approximate flow rate of 12 GPM(45 LPM) and will empty a typical 30 gallon (115 liter)holding tank in less than 3 minutes.The 18590 series waste pump will macerate and pumpall waste and tissue normally found in marine andrecreational vehicle waste systems.
|
|
|
|
| Available
Series # 18590 Self Priming Macerator Pump |
| Model
# |
Description |
Price
/ ea. |
ORDER |
CAN SHIP |
|
