Groco # ARG-2500 Bronze 2-1/2" Strainer with Monel Basket

Groco Pump ARG-2500

Groco # ARG-2500

Groco catalog # ARG-2500, ARG Series Cast Bronze 2-1/2 Inch Raw Water Strainer with Monel Basket, Clear Sight Glass, Bronze construction. Inlet Port is 2-1/2 Inch, Discharge Port is 2-1/2 Inch.

Price : $ 857.15

Qty :

Same Day (3 in stock)

Click Here for PARTS

 

Product Information :

The Groco ARG-2500 is a ARG Series Cast Bronze 2-1/2 Inch Raw Water Strainer with Monel Basket, Clear Sight Glass, and 2-1/2 Inch by 2-1/2 Inch Ports. The MODELMODEL raw water strainer is the ideal filtration solution for cooling water intakes for any marine engine, air conditioning unit, or genset. It has a C84400 bronze head casting and is UL Listed 255-D. This strainer is to be installed on the suction side of engines and pumps. The superior design makes them long lasting and easy to service while the variety of sizes means there is a fit for every application. This ARG series raw water strainer has a non-metallic cap that magnifies internal viewing for easy inspection, and a one-piece molded sight glass that eliminates tie rods and gaskets. The mounting system allows for removal without tools. It has a bonding connection on both sides, npt threaded ports, improved drain plug, an improved basket and handle, and o-rings seal all joining surfaces. This strainer has a non-metallic filter that is an advantage in continuous running or high usage installations such as air conditioning, generators, or refrigeration systems where the continuous flow of sea water shortens filter basket life. This non-metallic basket is inter-changeable with the metallic baskets. Install ARG series strainers vertically oriented above the outside waterline if possible.
WEIGHT : The Groco ARG-2500 weighs 32.4 Lbs.

Features :

Pump Body:
Bronze
Port Size:
Inlet Port is 2-1/2 Inch, Discharge Port is 2-1/2 Inch.

Applications

Inspect and clean the filter basket frequently. a seasonal application of waterproof grease that is silicon or teflon based do not use Petroleum based grease to the cap threads and oring will assure easy cap loosening for inspections and cleaning. Use only mild soapy water to clean the sight glass. Handtight is sufficient for a safe and leakproof seal following cap removal and replacement, but if you wish to snug the cap use Groco's W2531 spanner Wrench.