Burks # 75G6-2 Pump and Motor - 7-1/2 HP 115/230 Volts
Burks # 75G6-2
Burks catalog # 75G6-2, Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 7-1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor. Ports are 2-1/2 Inch NPT Inlet, 2 Inch NPT Outlet. Impeller Diameter is 6.06 Inch.
Product Manual PDF (view)Parts and Accessories for Burks model 75G6-2
Seal Kit :
Catalog # SK9917-22099, Seal Kit for all G6-1-1/2,G6-2, G6-2-1/2 Series Centrifugal Pumps with 143-215 JM Motors. Includes P/N #9917 - Mechanical Seal - Buna N, P/N # 22063-C - Shaft Sleeve - Bronze, P/N # 22099 - Casing O-Ring - Buna N,(2) P/N # 22083 - Shaft Sleeve O-Ring - Buna N, P/N # 22080 - Cap Washer O-Ring - Buna N, P/N # 1-529-1 - Impeller Cap Screw, P/N # 22105-C - Impeller Cap Washer
In Stock
Casing frozen or cracked ? New Pump Casing :
Catalog # 22151, Casing Assy-All Iron
In Stock
Other Parts :
Catalog # 22099, Gasket-Buna N
In Stock
Applications
MATERIALS OF CONSTRUCTION Adapter Cast Iron Casing Cast Iron Casing wear ring Bronze Impeller Bronze Shaft Steel Shaft Sleeve Bronze Shaft Seal CarbonCeramic / S. Steel / BunaN MAXIMUM OPERATING CONDITIONS TEMPERATURE For Standard BunaN Seal 225F 107C INLET PRESSURE 100 PSI 690 kpa CASING WORKING PRESSURE 200 PSI 1379kpa VISCOSITY 200 SSU FEATURES • RADIAL SPLIT CASING DESIGN Casing is close grain iron of 30,000 p.s.i. minimum tensile strength. Back pullout design eliminates the need to disturb piping should the pump ever require service the casing stays in the line. Centerline discharge. Stud mounted casing assures positive alignment and allows rotation of discharge to eight different positions. Openings are provided for test gauges, for venting and for draining the pump. • EASY TO SERVICE Taking out only 4 cap screws allows removal of pumping assembly without disturbing piping. • ENCLOSED BRONZE IMPELLER Enclosed bronze impeller is of latest hydraulic design for maximum efficiency. It is balanced for vibration free operation and threaded onto stainless steel motor shaft. • MECHANICAL SHAFT SEAL Standard selfadjusting shaft seal for temperatures to 225F 107C and pressures to 150 psi 1034kpa. Ceramic seat and carbon seal face for long troublefree service. Special seals are available for higher temperatures and fluids other than water. • BRONZE SHAFT SLEEVE Gasketed and keyed hooktype sleeve protects shaft from wear and corrosion in seal area. • MOTORS Standard pump motors have open drip proof construction and are rated with jet pump service factors for operation. Motors are 56 frame size with NEMA standard mounting flange, one piece threaded stainless steel shaft and ball/ball bearing construction. • FACTORY TESTED After careful assembly and inspection, EVERY pump is factory tested and will meet Hydraulic Institute standards.